Focusrite Scarlett 2i4
이번에 새로운 취미로 홈레코딩에 도전하려고 한다.
그럴려면 기본적으로 마이크와 오디오 인터페이스가 필요하다.
그래서 알아보던 중에 Focusrite 제품을 보게 되었는데
원하는 채널이 많지 않고
저렴한 오디오 인터페이스는 대부분 성능이 비슷한거 같아서
빨간색으로 잘 빠진 이녀석을 골랐다.
스칼렛 2i4 의 전 모델은 스칼렛 2i2 인데
처음에 2i2 모델을 사려다가 다음버전인 2i4가 나온것을 알게 되서
구입하게 되었다.
아직 한국에는 팔고있지 않아서
ebay를 통해 구입하였다.
새로운 제품에
믿을 수 있는 Seller
거기에
199.99 달러
FREE Shipping
잘산거 같다!
이제 배송이 오기만을 기다린다.
리뷰는 그때가서 :)
Specifications
- 2 in / 4 out USB audio interface
- 96 KHz, 24-bit conversion
- 2 Focusrite microphone preamplifiers
- Red anodised aluminium unibody chassis
Front panel
- 2 line/mic/instrument combination inputs - Neutrik XLR/ ¼ “ TRS Jack Combo
- 2 line/inst switches
- 2 illuminating “PAD” buttons
- 2 Gain knobs
- 2 Gain halo signal indicators
- 48V Phantom power switch
- MIDI activity LED indicator
- USB connection LED indicator
- “DIRECT MONITOR” control
- “STEREO/MONO” switch for direct monitor
- Large monitor level dial (controls headphone and line level outputs)
- Headphone output - ¼” TRS Jack
- Headphone level knob
- “HEADPHONE SOURCE” switch
Rear panel
- 2 balanced monitor outputs – TRS (channels 1-2)
- 4 unbalanced outputs – RCA Phono (channels 1-4)
- MIDI IO
- USB 2.0 Port
- Kensington Lock slot
Included software
- Ableton Live Lite 8
- Focusrite Scarlett plug-in suite
- Novation Bass Station
- Loopmasters content
Front panel
Rear panel
| Analogue Input Performance |
| Mic |
| Frequency Response | 20Hz - 20kHz +/- 0.1 dB |
| THD+N | < 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter) |
| Equivalent Input Noise (EIN) | < -120dB: measured at 55dB of gain with 150Ω termination (20Hz/22kHz bandpass filter) |
| Gain Range | +10dB to +55dB (0dB to +45dB when pad is engaged) |
| Max Input Level | +3.5dBu (2i2 보다 0.5 더 높다) |
| Line |
| Frequency Response | 20Hz - 20kHz +/- 0.1dB |
| THD+N | < 0.01% (‘A’ weighted measured with +16dB input gain -1dBFS at output and 22Hz/22kHz bandpass filter) |
| Noise | -90 dBu (22 Hz/22KHz bandpass filter) |
| Signal to Noise Ratio | > 100dB |
| Gain Range | -10dB to +35dB (-20dB to +25dB when pad is engaged) |
| Max Input Level | +26dBu (at 1% THD+N) (2i2 보다 6 더 높다) |
| Instrument |
| Frequency Response | 20Hz - 20kHz +/- 0.1dB |
| THD+N | 0.0025% (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) |
| Noise | -87dBu (22Hz/22kHz bandpass filter) |
| Gain Range | +10dB to +55dB |
| Max Input Level | +3dBu (+12dBu pad in) (2i2 보다 6 더높다) |
| Analogue Output Performance |
| Nominal Output Level | 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced |
| Frequency Response | 20Hz - 20kHz +/- 0.2dB |
| THD+N | < 0.0015%, balanced (-1dBFS input 22Hz/22kHz bandpass filter, un-weighted) < 0.03 %, unbalanced (0dBFS input 22Hz/22kHz bandpass filter) |
| Output Impedance | < 12Ω |
| Power Output into 32Ω | 24mW |
| Digital Performance |
| Clock sources | Internal clock only |
| A-D Dynamic Range | 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB |
| D-A Dynamic Range | 104dB (2i2 보다 1낮다) 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB |
| Supported sample rates | 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz |
| Crosstalk |
| Input to Input | Better than 90dB |
| Output to Output | Better than 90dB |
| Input to Output | Better than 85dB |
| Input Metering |
| Ring LED lit Green | Signal present (-24 dBFS) |
| Ring LED lit Red | Signal overload (0dBFS), peak held for approximately 1 second |
| Weight and Dimensions |
| Height | 48 mm |
| Width | 210 mm |
| Depth | 140 mm |
| Weight | 890 g |
